GB9Connecting the Speakers Connect Video to TV• Connect the satellite speakers, center speaker, andsubwoofer to the terminals on the rear panel usingspeaker cords supplied.• Insert the end of the speaker cord into the terminal.Match the polarity (colors): Red (+) to red (+) andblack (–) to black (–).SubwooferLeft frontspeakerLeft rearspeakerRight rearspeakerRight frontspeakerCenterspeakerPress and hold the terminal tab.1 Insert the speaker cord.2 Release the finger.31 2 3• for in-depth information about adjusting the delay time,see “Speaker Settings” on pages 32.Right front speaker Left front speakerSubwooferAUX INVIDEOVIDEO OUTANTENN AS-VIDEOIMPEDENCE IMPEDENCESPEAKERS SPEAKERSAV OUTAUX1 IN AUX2 INVIDEOY/CCOMP.VIDEO OUTANTENNAS-VIDEOAMR-FRONT-LR-REAR-L WOOFER CENTER66 63LRLRComposite Video (Good Quality)Connect the supplied video cable from the VIDEO OUT jack on the back panel ofthe system to the VIDEO IN jack on your television.S-Video (Better Quality)If you television is equipped with an S-Video input, connect an S-Video cable (notsupplied) from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on your television.Scart (Best Quality)If you television is equipped with an SCART input, connect an Scart Jack (notsupplied) from the AV OUT jack on the back panel of the system to the SCART INjack on your television.AUX INVIDEOVIDEO OUTANTENN AS-VIDEOIMPEDENCE IMPEDENCESPEAKERS SPEAKERSAV OUTAUX1 IN AUX2 INVIDEOY/CCOMP.VIDEO OUTANTENNAS-VIDEOAMR-FRONT-LR-REAR-L WOOFER CENTER66 63LRLRSCARTINS-VIDEOINVIDEOINTV10If your TV SCART terminal with Y/C-COMP. selector, you can get a better picture quality bysetting Y/C-COMP.selector to Y/C . in this case , you need to set Y/C-COMP. selector of thecenter unit to Y/C.GBRight rear speaker Left rear speakerCenter speaker