Samsung HT-DM150 Instruction Manual

Also see for HT-DM150: Instruction manual Instruction manual Instruction manual Instruction manual Manual

Connect the AM loop antenna supplied to the AM and terminals.The cooling fan dissipates the heat generated inside the unit so that the unit can be operatednormally. The cooling fan is activated automatically to supply cool air to the unit.Please observe the following cautions for your safety.• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could riseand may damage it.• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with anewspaper or cloth, heat may build up inside the unit and fire may result.)Cooling Fan18Connecting the Antennas17Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as atemporary measure.Slowly move the antenna wire around until you find a location wherereception is good, then fasten it to a wall or other rigid surface.• If reception is poor, connect an outdoor antenna.Before attaching a 75Ω coaxial cable (with astandard type connector), disconnect the suppliedFM antenna.CONNECTIONSFM antenna connection12 If reception is poor, connect an outdoor single vinyl-covered wire to the AMterminal. (Keep the AM loop antenna connected).AM(MW) antenna connection1 2 312FM Antenna (supplied)Snap the tabs on the loop into theslots of the base to assemble theAM loop antenna.AM Loop Antenna(supplied)If AM reception is poor, connect an outdoorAM antenna(not supplied).