11Connecting the Speakers Connect Video to TV• Connect the satellite speakers, center speaker, andsubwoofer to the terminals on the rear panel using speakercords supplied.• Connect the red cord to the red (+) terminal and the blackcord to the black (-) terminal.SubwooferLeft frontspeakerLeft rearspeakerRight rearspeakerRight frontspeakerCenterspeakerPress and hold the terminal tab.1 Insert the speaker cord.2 Release your finger.31 2 3• For details on the “Ideal Speaker Placement” see page 34.12Right rear speakerRight front speaker Left front speakerLeft rear speakerSubwooferComposite Video (Good Quality)Connect the supplied video cable from the VIDEO OUT jack on the back panel of thesystem to the VIDEO IN jack on your television.S-Video (Better Quality)If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack onyour television.Component Video (Best Quality)If your television is equipped with Component Video inputs, connect a component videocable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to thecorresponding jacks on your television.• When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feedany signals.* Depending on your TV, Component Video input connectors may be marked as DVD Video input connectors.Center speakerCONNECTIONSRedBlack