Samsung HT-DM550 Instruction Manual

Also see for HT-DM550: Manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

39When the button is pressed, a presetbroadcast station is selected.Hold in the button. Automatic searchingbegins, and then stops when a station is tuned in.Press the button to tune to the chosenstation. The frequency changes incrementally in eitherdirection each time the corresponding button is pressed.Listening to the RadioAuto Station 1Auto Station 2Manual StationPress the Tuner(Band)button.1 Select a broadcast station.2• The selection toggles backand forth between "FM" "MW"and "LW" each time theTuner(Band) button ispressed.Press the MO/ST button. (only FM)• The selection toggles back and forth between “STEREO” and “MONO” each time theMO/ST button is pressed.• In a poor reception areas, select Mono mode for a clear, interference-free broadcast.To Listen in Mono/StereoAudioMO/STRemoteControlUnitPress the Stop ( ) button to select the PRESETmode. Then press the button to select astation stored in the presetPress the Stop ( ) button to select the MANUALmode on the front panel. Then hold in thebutton to make the unit begin automaticall searching forbroadcast stations.Press the Stop ( ) button to select the MANUALmode front panel. Press the button to tuneto the desired station. The frequency changesincrementally in either direction each time thecorresponding button is pressed.Auto Station 1Auto Station 2Manual Station1 Select a broadcast station.2MainUnitPress the Function button toselect the desired band (FM,MW or LW).You can listen to the chosen band (FM, MW or LW broadcast stations) by using eitherthe automatic tuning or manual tuning operation.