14Connecting the Video to TVSUBWOOFER REARR FRONTRCENTER REARL FRONTLIMPEDANCEFRONT / CENTER / REAR : 6ΩSUBWOOFER : 3ΩVIDEOComponentVideo• When the Progressive scan mode is selected, the VIDEO output do not feedany signals.NoteCONNECTIONSMETHOD 1METHOD 2METHOD 3METHOD 2 Scart ...............Good QualityIf your television is equipped with a SCART input,Connect the supplied video cable fromthe VIDEO OUT jack on the back panel of the system to the VIDEO jack on the Scart Jack,then connect the SCART jack to the SCART IN jack on your television.METHOD 1 Composite Video ............... Good QualityConnect the supplied video cable from the VIDEO OUT jack on the back panel of thesystem to the VIDEO IN jack on your television.METHOD 3 Component (Progressive Scan) Video ............... Better QualityIf your television is equipped with Component Video inputs, connect a component videocable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to thecorresponding jacks on your television.1p~32p(DS110)-GB 9/16/04 9:29 AM Page 17
