Samsung HT-DS760T Instruction Manual

Also see for HT-DS760T: Service manual Service manual Instruction manual Instruction manual

Contents

62SETUP• If the system is installed at a location where sound cannotbe reflected (e.g., an open space without walls), the speakerdistance, channel level, and rear sound reflection effect maybe set incorrectly during the RRSS setup.CautionTo select the RRSS that you have setBriefly press the RRSS button.(If you have set the RRSS for the first time according toSteps 1 to 3 on the previous page)• Your selection will toggle between "REAR REFLECTINGON" and "REAR REFLECTING OFF" on the display.• Select "REAR REFLECTING ON" to listen using theRRSS setting and select "REAR REFLECTING OFF" tolisten to the disc currently being played in its originalsetting.To enable or disable the sound logoWhen you turn on the power, a sound logo will be heard,indicating that the disc reading is completed and the player isin its optimal condition to play the disc.1. Press and hold the RRSS button.• "S.LOGO ON" or "S.LOGO OFF" appears on thedisplay.2. Briefly press the RRSS button.• Each time you press the button, your selection togglesbetween "S.LOGO ON" and "S.LOGO OFF".• Select "S.LOGO ON" to enable the sound logo andselect "S.LOGO OFF" to disable the sound logo.To check the RRSS that you have set1. Press and hold the RRSS button twice.• "CHECK" appears on the display.2. Next,briefly press the RRSS button.• The speaker distance and level value for each channelwill be displayed.To cancel the RRSS setupPress the RRSS button.• The tone output stops, "CANCEL" appears on thedisplay, followed by "REMOVE MIC", and then thesetup will be cancelled.* This drawing is provided for illustrationpurposes only and the actual appearanceof the items depicted may vary.L: Front Speaker (L) R: Front Speaker (R)C: Center Speaker SW: SubwooferLS: Rear Speaker (L) RS: Rear Speaker (R)Auto Sound CalibrationMicrophone41P~76P(DS760T)-GB 2004.5.15 11:30 AM Page 63