43 44Setting TV Screen type2143In Stop mode,press MENUbutton.Press Cursorbutton to move to‘Setup’ and thenpress ENTER button.• Once the setup is complete, you willbe taken to the previous screen.Press Cursorbutton to move to ‘TVDISPLAY’ and thenpress ENTER button.Press Cursor ,button to select thedesired item and thenpress ENTER button.Press RETURN button to return to the previous level.Press MENU button to exit the setup screen.SETUPThe horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and highdefinition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in differentscreen size, you should adjust the aspect ratio to fit your TV or monitor.✱ For a standard TV, select either "4:3LB" or "4:3PS" option according topersonal preference. Select "16:9" if you have a wide screen TV.: Select this to view a 16:9 picture in the full-screenmode on your wide screen TV.• You can enjoy the wide screen aspect.: Select this to play a 16:9 picture in the letter boxmode on a conventional TV.• Black bars will appear at the top and bottom of the screen.: Select this to play a 16:9 picture in the pan & scanmode on a conventional TV.• You can see the central portion of the screen only (with thesides of the 16:9 picture cut off).4:3LB(4:3 Letterbox)WIDE4:3PS(4:3 Pan&Scan)• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.• Since DVD discs are recorded in various image formats, they will look different depending onthe software, the type of TV, and the TV aspect ratio setting.NoteAdjusting the TV Aspect Ratio (Screen Size)Depending on your TV type (Wide Screen TV or conventional 4:3 TV), you can select theTV's aspect ratio.41P~76P(DS700)-GB-NOR 2004.3.10 10:00 AM Page 42