Samsung HW-C500 User Manual

Also see for HW-C500: User manual User manual User manual User manual

ASC (AUTO SOUND CALIBRATION) SETUPBy setting the ASC function just once when you relocate or install the unit, you can have the unit automaticallyrecognize the distance between speakers, levels between channels, and frequency characteristics to create a5.1-channel sound field optimized for your environment.- Before Setting -1. Plug the ASC microphone into the ASC MIC jack.2. Place the ASC microphone at the listening position.3. Press the ASC button on the front panel, and then press the ENTER button.1. Press the SETUP/MENU button.,, Each time the button is pressed, the mode switches between SETUPENTER and SETUP OFF.2. Press the ENTER button to select SETUP ENTER.3. Press the A T buttons to select ASC SETUP, and then press theENTER or _ button.4. Press the A T buttons to select ASC START, and then press theENTER button.,, To create the optimal 5.1 channel sound field, the selections are in thefollowing sequence:L_C_R_SR_SL_SW,, EQ ON : The ASC(Auto Sound Calibration) EQ mode is set to on.EQ OFF: The ASC(Auto Sound Calibration) EQ mode is set to off.F'IU±IZU ZIC s UF _ jnc ,- ,::,_-_T i, aF_ZII_ JL _ Ul* JFTin Jq[nDl_ D i F't F[ , J5. Ifyou see a ASC READY message on the screen, press the ENTER button to apply the measurement value.And then unplug the ASC microphone.To cancel the ASC (Auto Sound Calibration) setup.This will be automatically reverted if you press the RETURN button.®42_ Settingthe ASCfunctiontakesabout3 minutes._ Becausethe volumelevelof the toneisfixeddudngtheASCsetup,youcannotadjustthe volumeusingthe volumecontrol._ Ifthe ASCmicrophoneis disconnectedduringtheASCsetup,the setupwill be canceled._ YoucanalsopresstheASCbuttonontheremotecontroltousethisfunction.