Samsung HW-D600 User Manual

Also see for HW-D600: User manual User manual

Contents

40 EnglishSetupSetting EX/ES ModeWhen surround back speakers are connected, you can listen to 7.1 multi-channel sound using the built-inDolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source(such as a DVD player) is input, and does not work with L.PCM and Dolby Digital 2 channel sources.Press the SETUP/MENU button on the remote control.Each time the button is pressed, the mode switches between INPUT and SETUP OFF.Press the ▲▼ buttons to select SURROUND, and then pressthe ENTER button.Press the ▲▼ buttons to select EX/ES, and then press theENTER button.Press the ▲▼ buttons to set the EX/ES mode you want.AUTO : If the unit receives an audio signal that it canrecognize, it will select an optimal decoder for playback in7.1 channels.If the amplifier does not recognize the audio signal, it will notplay in 7.1 channel automatically.OFF : Dolby Digital Surround EX / DTS ES decoder will notbe used for playback.ON : Dolby Digital or DTS signal will be played in 7.1 channelusing Dolby Digital Surround EX / DTS ES decoder.NOTEYou cannot use DTS-ES without surround back speakers connected.Other SettingsAudio SyncVideo may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audiodelay time to match the video.Press the SETUP/MENU button on the remote control.Each time the button is pressed, the mode switches between INPUT and SETUP OFF.Press the ▲▼ buttons to select OPTION, and then press theENTER button.Press the ▲▼ buttons to select AUDIO SYNC, and thenpress the ENTER button.Press the ◄ ► buttons to set the AUDIO SYNC Delay Time.You can adjust it from 0 to 240MS in 10MS steps.1.•2.3.4.•••✎1.•2.3.4.•HW-D600_D650S_ELS_0603.indd 40HW-D600_D650S_ELS_0603.indd 40 2011-06-03 12:40:332011-06-03 12:40:33