Samsung HW-D700 User Manual

Also see for HW-D700: User manual

Contents

English 5104 OperationSelecting the 3D SOUND modePress the AUDIO EFFECT button to select 3D SOUND mode.Each time you press this button,    3D SOUND willbe selected in turn.Press the <, > button.Each time you press the <, > button, 3D SOUND ON  3D SOUND OFF will be selected in turn.You can also select the 3D SOUND mode by pressing the 3D SOUND button on the remote control.NOTEThe 3D sound effect will not be available for Dolby TrueHD, Dolby Digital Plus, DTS-HD MasterAudio and DTS-HD High Resolution Audio.You cannot use Dolby Pro Logic llx mode for Analogue multi channel signals, LPCM multi channelsignals from HDMI, Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and DTS-HD HighResolution Audio.Pro Logic works with the audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.The 3D sound effect will not be available for FM.Using the SUBWOOFER buttonYou can set the subwoofer Level.Press the SUBWOOFER button.Press the ◄ ► buttons to select Subwoofer LEVEL under theDisplay with S.W. (The display disappears automatically.)- Setting the Subwoofer Level-SW (Subwoofer) : -10 ~ +10dBListening to the RadioYou can listen to the radio by using either automatic or manual tuning.Press the INPUT SELECT button on the remote control to select FM.Select a frequency (radio broadcast).Preset tuning :Press the #,$ buttons on the remote control to select the preset frequency.Manual tuning 1 (Automatic tuning):Press and hold the TUNING/CH ( .,, ) buttons on the remote control to automatically tune ina frequency.Manual tuning 2 :Press the TUNING/CH ( .,, ) buttons on the remote control to increase or decrease thefrequency step by step.NOTEYou can also use the SELECT (.,,) button on the main uint to change the radio frequency.1.•2.••✎1.2.•1.2.•••✎HW-D700_D770S_ELS_0609.indd 51HW-D700_D770S_ELS_0609.indd 51 2011-06-09 5:38:402011-06-09 5:38:40