Samsung HW-Q60T Full Manual

Also see for HW-Q60T: Full manual Full manual

ENG - 8NOTES• Do not connect the power cord of this product or your TV to a wall outlet until all connectionsbetween components are complete.• Before moving or installing this product, be sure to turn off the power and disconnect the power cord.• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and theSTANDBY LED on the rear of the sub-woofer will turn red after blinking in blue several times.• If you use a device that uses the same frequency (5.8GHz) as the Soundbar near the Soundbar,interference may cause some sound interruption.• The maximum transmission distance of the main unit’s wireless signal is about 10 meters, but mayvary depending on your operating environment. If a steel-concrete or metallic wall is between themain unit and the wireless subwoofer, the system may not operate at all because the wirelesssignal cannot penetrate metal.PRECAUTIONS• Wireless receiving antennas are built into the wireless subwoofer. Keep the unit away from waterand moisture.• For optimal listening performance, make sure that the area around the wireless subwoofer and theWireless Receiver Module (sold separately) is clear of any obstructions.Connecting an SWA-8500S (Sold Separately) to your SoundbarExpand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit(SWA-8500S, sold separately) to your Soundbar.1. Connect the Wireless Receiver Module to 2 Surround Speakers.– The speaker cables are colour coded.SURROUND-LEFTID SETL RSURROUND SPEAKERS OUTSPEAKER IMPEDANCE : 3ΩPOWERID SETL RSURROUND SPEAKERS OUTSPEAKER IMPEDANCE : 3ΩSURROUND-RIGHTSURROUND-LEFT SURROUND-RIGHT