Samsung HW-Q70T Full Manual

Also see for HW-Q70T: Full manual User manual Full manual User manual

ENG - 29What is the difference between BT READY and BT PAIRING?• BT READY : In this mode, you can reconnect any Samsung TV or mobile device that wasconnected before.• BT PAIRING : In this mode, you can connect a new device to the Soundbar.(Press the PAIR button on the Soundbar remote control or press and hold the (Source)button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.)Notes on Bluetooth connection• Locate a new device within 3.28 ft (1 m) to connect via Bluetooth communication.• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.• The Soundbar automatically turns off after 18 minutes in the Ready state.• The Soundbar may not perform Bluetooth search or connection correctly under the followingcircumstances:– If there is a strong electrical field around the Soundbar.– If several Bluetooth devices are simultaneously paired with the Soundbar.– If the Bluetooth device is turned off, not in place, or malfunctions.• Electronic devices may cause radio interference. Devices that generate electromagnetic wavesmust be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.• The Soundbar supports SBC data (44.1kHz, 48kHz).• Connect only to a Bluetooth device that supports the A2DP (AV) function.• You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free)function.• When connecting the Soundbar to a Bluetooth device, place them as close to each other as possible.• The farther the Soundbar and Bluetooth device are from each other, the lower the sound qualitywill become.The Bluetooth connection may break when the devices are out of the effective range.• The Bluetooth connection may not function as intended in areas with poor reception.• A Bluetooth device may experience noise or malfunction under in the following conditions:– When the body is in contact with the signal transceiver on the Bluetooth device or Soundbar– In corners or when there is an obstacle in proximity, such as a wall or partition, where electricalchanges may occur.– When exposed to radio interferences by other products operating on the same frequencyranges, such as medical equipment, microwave ovens, and wireless LAN devices.– Obstacles such as doors and walls may still impact the sound quality even when the devicesare within the effective range.