Call Functions 29Answering a Call• “Mobile”Voice Dial dials the specified number.Dialing a NumberTo dial a number using Voice Dial, do the following:1. In standby mode, press the key.“Say a Command” appears in the display and is pronounced through thespeaker.2. Say “Call”.VoiceSignal prompts you to “Say the name or #”.3. Speak clearly and say the telephone number of the person you want to call.For example, say “7 8 1 9 7 0 5 2 0 0."If it recognizes the number, Voice Dial repeats and dials the number. IfVoice Dial is not sure it has recognized the number, it displays a choice listof up to three numbers and prompts you with “Did you say?” followed bythe first number on the list.4. Say “Yes” to confirm the number or “No” to hear the next one, or use thekeypad to select the correct number from the list. (See “Choice Lists” onpage 126, for more information.)• Press the Repeat (right) soft key ( ) to say the name again.• Press the Settings (left) soft key ( ), then press the Exit (right) soft key( ) to exit Voice Dial without dialing.Pause Dialing From a Contacts Entry• If you voice dial a contact that contains (two-second) T pause(s) simply wait for thepauses to pass and the dialing to complete.• If you voice dial a contact that contains (hard) P pause(s), wait for the appropriateprompt(s) from the number you are calling (credit card number, bank accountnumber, and so on) and enter the appropriate response(s).Answering a CallYour phone notifies you of a call in the following ways:• A ring tone sounds and/or your phone vibrates (Your phone provides seven ringvolume settings including: Silence All, Vibrate, 1 Beep, Low, Medium,Medium/High, or High, and/or different ring types to distinguish callers.)• A phone number (unless blocked by the caller) and a name appear in the display (Ifthe caller’s number and name are stored in your Contacts list).
