ŝ22ŞThings to watch out for when taking pictures Focus lockƈ To focus on a subject not positioned in the centre of the picture, use the focuslock function.ƃ Using the Focus Lock1. Ensure the subject is in the centre of the autofocus frame.2. Press the SHUTTER button halfway. When the green auto focus frame lightsup, it means the camera is focused on the subject. Be careful not to press theSHUTTER button all the way down to avoid taking an unwanted picture.3. With the SHUTTER button still pressed down only halfway, move the camerato recompose your picture as desired, and then press the SHUTTER buttoncompletely to take the picture. If you release your finger from the SHUTTERbutton, the focus lock function will be cancelled.[The image to be captured] [Press the SHUTTERbutton halfway and focuson the subject][Recompose the pictureand fully press theSHUTTER button]ƈ Under certain conditions the auto focus system may not perform as expected.- When photographing a subject that has little contrast.- If the subject is highly reflective or shiny.- If the subject is moving at high speed.- When there is strong reflected light, or when the background is very bright.- When the subject matter has only horizontal lines or the subject is very narrow(such as a stick or flagpole).- When the surroundings are dark.