116 _SOFTWAREStarting PC modeIf you connect the USB cable to a USB port on your PC and then turn onthe power, the camera will automatically switch to "computer connec-tion mode". In this mode, you can download stored images to your PCthrough the USB cable. Camera settings for connection1. Turn on the camera2. Connect the camera and computer withthe supplied USB cable.3. Turn on the computer. The camera andcomputer are connected.4. External device selection menu will bedisplayed on the LCD monitor.5. Select the [Computer] by pressing the Up/ Down button and press the OK button.Select USBComputerPrinterConfirmOK Connecting the camera to a PC Disconnecting the camera and PCRefer to page 118 (Removing the removable disk).Ä If you selected [Printer] in Step 5, when you connect the camera toyour computer, the [Connecting Printer] message will display and theconnection will not be established.In this case, disconnect the USB cable, and then follow the procedurefrom Step 2 onwards.