Samsung ITP-5107 User Manual

Also see for DS 5007S KEYSET: General description Quick reference guide User guide Quick reference guide User guide

Contents

7T E L E C O MCONTROLLING VOLUME LEVELSVolume levels for the speakerphone, ringer and handset can be adjusted using the [Volume] buttons. The levels you set willbe saved in memory. If background music is set, the volume levels of music and page announcements can also be adjustedusing the [Volume] buttons. There are 16 volume levels.Handset Volume1. Pick up the handset and listen to the tone.2. To increase handset volume, press the [Volume] button.3. To decrease handset volume, press the [Volume] button.Speakerphone Volume1. Press the [Speaker] button.2. To increase speakerphone volume, press the [Volume] button.3. To decrease speakerphone volume, press the [Volume] button.Ringer Volume1. To increase ringer volume, press the [Volume] button while the phone is ringing.2. To decrease ringer volume, press the [Volume] button while the phone is ringing.Selecting the Ring ToneOne of eight ring tones can be selected.1. Press the [Transfer] button.2. Press [1][1][1].3. Press button [1]-[8] in order, or press the [Volume] button, to listen to each ring tone.4. When you hear the desired dial tone, press the [Transfer] button to save the setting.CHANGING THE PHONES PASSCODEYour pre-assigned extension passcode is 1234. You can change the passcode if needed.1. Press the [Transfer] button.2. Press [1][0][1].3. Enter the current passcode (e.g. 1234).4. Enterthenewpasscode.Thepasscodemustbea4-digitnumber(0-9).5. Re enter the new passcode for confirmation. If the passcode is entered correctly, a beep will be heard twice. If four beepsare heard, the passcode entry is incorrect.6. Save the new passcode by pressing the [Transfer] button.SWITCHING HEADSET / HANDSET MODEYou can switch between handset mode and headset mode if you have a headset connected to your phone. In headset mode, youanswer or end a call by pressing the [Speaker] button.1. Press the [Transfer] button.2. Press [1][1][0].3. To use the handset, press [0][2][0] To use the headset, press [0] [2] [1]4. Save the selected entry by pressing the [Transfer] button.NB: If your phone has a headset mode on/off button, press this button. The button’s LED will light when headset mode is set.Press again to return to handset mode. The LED goes off