Setting satellite system(MENU/123) MENU Broadcasting Channel Settings Satellite SystemYou can configure a set of satellite dish settings before performing a channel scan." This function is only available on certain models in specific geographical areas.Changing teletext language(MENU/123) MENU Broadcasting Channel Settings Teletext LanguageYou can set or change the teletext language. To watch the teletext broadcast in your preferredlanguage, select a language to use in Primary teletext. If this language is not supported, you canwatch the teletext broadcast in your secondary preferred language set in Secondary teletext." This function is only available on certain models in specific geographical areas.Showing common interface menu(MENU/123) MENU Broadcasting Common InterfaceYou can view information about common interfaces.● CI MenuEnables the user to select from the CAM-provided menu. Select the CI menu based on the menuPC Card.● CAM video transcodingConfigures the setting to transcode the video codec from the CAM automatically. Turn it Off ifyou do not want to use it." You must use a CAM that supports video codec transcoding.● Application InfoDisplays information about the CAM inserted into the CI slot and about the “CI or CI+ CARD”inserted into the CAM. You can install the CAM any time, with or without the TV turned on.● CICAM PIN ManagerManages Common Interface Common Access Module (CICAM) PIN. Save PIN or change storedPIN and then set other PIN options.