39Call Name Dialing: Contact NameTo use Name Dial, you’ll need to have entries stored in your Contacts list. For moreinformation, refer to "Adding a Contact" on page 56.1. From the main screen, press and hold the Voice Commands key ( ).2. After a brief pause, a list of optional commands appears in the display andthe audio prompt “Please say a command” plays through thespeakerphone.3. Say “Call” at a distance of 3-12 inches from the phone in a natural voice.4. “Please say the Name, Number, Voicemail or Last Number” plays throughthe speakerphone.5. To use Name Dialing, say the name of the contact that you want to dial.6. The name that you said is repeated through the speakerphone and yourphone dials the number (or prompts you to select which number to dial ifmore than one phone number is stored for that contact).7. If VoiceSignal is not sure of the name that you said, a list of possiblematches appears in the display.8. You’re asked to confirm the correct name as VoiceSignal displays theresults. Say “Yes” or “No” to confirm or reject the number when prompted.9. VoiceSignal repeats the number that you selected and dials that number.Send Text Msg: New Message1. From the main screen, press and hold the Voice Commands key ( ).2. A list of commands appears in the display and the audio prompt "Pleasesay a command" plays through the speakerphone.3. Say “Send Text” or "Send Picture" at a distance of 3-12 inches from themicrophone.4. “Please say the name or number” plays through the speakerphone. Say aphone number or a contact name exactly as it is displayed in your Contactslist.5. The NEW TXT MSG screen or NEW PICTURE MSG screen will appear in thedisplay with the To field filled in with the contact name or number that youspecified.6. To complete the message, refer to Step 5 in see "Creating and SendingTXT Messages" on page 72 or see "Creating and Sending PictureMessages" on page 73.00
