32 Selecting the self-timer1. Rotate the Mode dial to select a desiredRECORDING mode.2. Press the SELF-TIMER / RIGHT ( ✢ )button until the desired mode indicatordisplays on the LCD monitor. A 10 second,2 second, Double self-timer or Motion timericon appears on the LCD monitor.3. When you press the SHUTTER button,the picture will be taken after thespecified time has elapsed.Self-timer ( ✢ ) / Right button[Selecting the 10 SECself-timer] Self-timer mode indecatorIcon Mode Description✢ 10SECself-timerPressing the shutter button will allow an intervalof 10 seconds before the image is taken.✡ 2SECself-timerPressing the shutter button will allow an intervalof 2 seconds before the image is taken.✣ Doubleself-timerA picture will be taken after about 10 secondsand 2 seconds later a second picture will betaken. When using the flash, the 2-secondself-timer may be delayed for longer than 2seconds depending on the flash charging time. MotionTimerThe camera detects the subject's movement 6seconds after pressing the Shutter button, and thepicture is taken when the movement is stopped.When the menu is displayed on the LCD monitor, pressing the Rightbutton makes the cursor shift to the right tab.When the menu is not displayed on the LCD monitor, the RIGHTbutton operates as the Self-timer ( ✢ ) button. This function is usedwhen the photographer would also like to be in the image. If you operate the Self-timer button during the self-timeroperation, the self-timer function is cancelled. Use a tripod to prevent the camera from shaking. In Movie Clip mode, only the 10SEC self-timer will work.