《55》Setup menu[ Start up sound ]■ You can select the sound that is activated whenever the camera is turned on.[ Sound Volume ]■ You can select the sound volume levels of start sound, operation sound andshutter sound.● [Sound Volume] sub menus : [Off], [Low], [Medium],[High]OffLowMediumHighStart ImageSound VolumeBEEP SoundStart SoundShutter Sound◀Start ImageSound VolumeBEEP SoundStart SoundShutter Sound◀● Start up sound : [Off], [Sound 1], [Sound 2],[Sound 3]- If the start up image is set to [Off], the start upsound will not activate, even though you mayhave set these to on.OffSound 1Sound 2Sound 3Start ImageSound VolumeBEEP SoundStart SoundShutter Sound◀[ Operation Sound ]■ If you set sound to ON, various sounds will be activated for camera startup,when buttons are pressed, so that you can be aware of the camera operationstatus.● [Sound] sub menus : [Off], [Sound 1], [Sound 2],[Sound 3]● You can set sound to [Off][ Quick view ]■ If you enable Quick View before capturing an image, you can view the imageyou just captured on the LCD monitor for the duration set in the [Quick View]setup. Quick view is only possible with still images.● Sub menus[Off] : The quick view function can’t beactivated.[0.5, 1, 3 sec] : The captured image is brieflydisplayed during the selected time.Off0.5 sec1 sec3 secImprintLCDAF LampPower OffQuick View◀OffLOGOUser imageStart ImageSound VolumeBEEP SoundStart SoundShutter Sound◀[ Start up image ]■ You can select the image that is first displayed on the LCD monitor wheneverthe camera is turned on.● Start up image : [Off], [LOGO], [User Image]- Use a saved image for the start-up image with the[START IMAGE] in the [RESIZE] menu in the playmode.- The start-up image will not be deleted by [DELETE]or [Format] menu.- The User images will be deleted by [Reset] menu.Exit:BACKExit:BACKExit:BACKExit:BACKExit:BACKOffSound 1Sound 2Sound 3