<< 57 >>Setup menu 2 ( )The Movie output signal from the camera can be NTSC or PAL.Your choice of output will be governed by the type of device (monitor or TV,etc.) to which the camera is connected. PAL mode can support only BDGHI.Q Connecting to an external monitorWhen the camera is connected to anexternal monitor, the image and menuson the LCD monitor will be visible on theexternal monitor and the LCD monitor of thecamera.Selecting Video out typeYellow - VideoWhite - sound- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.- PAL : Australia, Austria, Belgium, China, Denmark, Finland,Germany, U.K., Holland, Italy, Kuwait, Malaysia, NewZealand, Singapore, Spain, Sweden, Switzerland, Thailand,Norway.- When using a TV as an external monitor, you will need to select theexternal or AV channel of the TV.- There will be a digital noise on the external monitor, but it is not amalfunction.- If the image is not in the centre of the screen, use the TV controls tocentre it.- When the camera is connected to an external monitor, some parts ofthe image may not be displayed.SETUP 2NTSCPALQuick View Power Off LCD Save Video OutFormat Reset Back Set OK2