English - 2Troubleshooting: Before Contacting Service PersonnelNo sound or picture Check that the mains lead has been connected to a wall socket.Check that you have pressed the button on your set.Check the picture contrast and brightness settings.Check the volume.●●●●Normal picture but no sound Check the volume.Check whether the MUTEM button has been pressed on the remote control.Check the Speaker Select settings.●●●Screen is black and power indicatorlight blinks steadilyOn your computer check; Power, Signal Cable.The TV is using its power management system.Move the computer’s mouse or press any key on the keyboard.●●●No picture or black and white picture Adjust the colour settings.Check that the broadcast system selected is correct.●●Sound and picture interference Try to identify the electrical appliance that is affecting the set and move it further away.Plug your set into a different mains socket.●●Blurred or snowy picture, distortedsoundCheck the direction, location and connections of your aerial.This interference is often due to the use of an indoor aerial.●●Remote control malfunctions Replace the remote control batteries.Clean the upper edge of the remote control (transmission window).Check the battery terminals.●●●‘Check signal cable.’ message isdisplayedCheck that the signal cable is firmly connected to the PC or video sources.Check that the PC or video sources are turned on.●●On PC mode, ‘Not Supported Mode.’message is displayedCheck the maximum resolution and the frequency of the video adaptor.Compare these values with the data in the Display Modes.●●The damaged picture appears in thecorner of the screenIf Screen Fit is selected in some external devices, the damaged picture may appear inthe corner of the screen. This symptom is caused by external devices, not TV.The ‘Resets all settings to the defaultvalues.’ message appears.This appears when you press and hold the EXIT button for a while. The product settingsare reset to the factory defaults.You may see small particles if youlook closely at the edge of the bezelsurrounding the TV screen.This is part of the product’s design and is not a defect.The TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce.However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of theproduct.SpecificationsModel Name LE26B350 LE32B350Screen Size (Diagonal) 26 inches 32 inchesPower ConsumptionStandby <1W <1WPC Resolution(Optimum) 1360 x 768 @ 60Hz 1360 x 768 @ 60HzSound(Output) 5W X 2 5W X 2Dimensions (WxDxH)BodyWith stand665 x 75 x 453 mm665 x 215 x 496 mm799 x 76 x 530 mm799 x 218 x 573 mmWeightWith Stand 7 kg 10 kgEnvironmental ConsiderationsOperating TemperatureOperating HumidityStorage TemperatureStorage Humidity10°C to 40°C (50°F to 104°F)10% to 80%, non-condensing-20°C to 45°C (-4°F to 113°F)5% to 95%, non-condensing10°C to 40°C (50°F to 104°F)10% to 80%, non-condensing-20°C to 45°C (-4°F to 113°F)5% to 95%, non-condensingStand SwivelLeft / Right 0˚ 0˚Design and specifications are subject to change without prior notice.This device is a Class B digital apparatus.For the power supply and Power Consumption, refer to the label attached to the product.¦N¦NNN