Samsung LE26C355 User Manual

18 EnglishBasic FeaturesAudio Description(not available in all locations)(digital channels only)This function handles the Audio Streamfor the AD (Audio Description) which issent along with the Main audio from thebroadcaster.Audio Description (Off / On)■ : Turn the audio descriptionfunction on or off.Volume■ : Adjust the audio description volume.Auto Volume (Off / Normal / Night)To equalize the volume level on each channel, set to Normal.Night■ : This mode provides an improved soundexperience compared to Normal mode, making almostno noise. It is useful at night.Speaker Select (External speaker / TVspeaker)A sound echo may occur due to a difference in decodingspeed between the main speaker and the audio receiver. Inthis case, set the TV to External Speaker.When✎ Speaker Select is set to External Speaker, thevolume and MUTE buttons will not operate and thesound settings will be limited.When✎ Speaker Select is set to External Speaker, youshould use these settings.TV Speaker: Off , Externalx Speaker: OnWhen✎ Speaker Select is set to TV Speaker, youshould use these settings.TVx Speaker: On , External Speaker: OnIf there is no video signal, both speakers will be mute.✎Additional Setting(digital channels only)DTV Audio Level (MPEG / HE-AAC)■ : This functionallows you to reduce the disparity of a voice signal(which is one of the signals received during a digital TVbroadcast) to a desired level.According to the type of broadcast signal,✎ MPEG/ HE-AAC can be adjusted between -10dB and0dB.To increase or decrease the volume, adjust✎ between the range 0 and -10 respectively.SPDIF Output■ : SPDIF (Sony Philips Digital InterFace)is used to provide digital sound, reducing interferencegoing to speakers and various digital devices such as aDVD player.Audio Format: During the reception of a digital TVbroadcast, you can select the Digital Audio output(SPDIF) format from the options PCM, Dolby Digital orDTS.By connecting to 5.1ch speakers in a Dolby✎ Digital setup, maximize your interactive 3D soundexperience.Audio Delay: Correct audio-video mismatch, whenwatching TV or video, and listening to digital audiooutput using an external device such as an AV receiver.Dolby Digital Comp (Line / RF)■ : This function minimizessignal disparity between a dolby digital signal and avoice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).Select✎ Line to obtain dynamic sound, and RFto reduce the difference between loud and softsounds at night time.Line: Set the output level for signals greater or less than-31dB (reference) to either -20dB or -31dB.RF: Set the output level for signals greater or less than-20dB (reference) to either -10dB or -20dB.Sound Reset (OK / Cancel)Reset all sound settings to the factory defaults.Selecting the Sound Mode¦When you set to Dual l ll, the current sound mode isdisplayed on the screen. tAudioType Dual l ll DefaultA2StereoMono MONO AutomaticchangeStereo Stereo ↔ monoDual Dual l ↔ Dual ll Dual lNICAMStereoMono Mono AutomaticchangeStereo Mono ↔ stereoDual Mono ↔ Dual lDual ll Dual lIf the stereo signal is weak and an automatic switching,✎ occurs, then switch to the mono.Only activated in stereo sound signal.✎ Only available when the✎ Input source is set to TV.MEDIA.PDUAL