Samsung LE32C550J1W User Manual

Also see for LE32C550: User manual User manual User manual

14 EnglishBasic FeaturesECO Sensor (Off / On)■ : To enhance your powersavings; the picture settings will automatically adapt tothe light in the room.If you adjust the✎ Backlight, the Eco Sensor will beset to Off.Min Backlight: When ECO sensor is On, the minimumscreen brightness can be adjusted manually.If✎ Eco Sensor is On, the display brightnessmay change (become slightly darker or brighter)depending on the surrounding light intensity.No Signal Power Off (Off / 15 min / 30 min / 60 min)■ :Activates the Stand-by mode, in the case of “No Signal”or “Check Signal Cable” status for a certain period oftime defined by the user.Disabled when the PC is in power saving mode.✎Changing the Picture Options¦Advanced Settings(available in Standard / Movie mode)You can adjust the detailed setting for the screen includingcolour and contrast.In PC mode, you can only make changes to✎ DynamicContrast, Gamma and White Balance.Advanced SettingsBlack Tone : Off ►Dynamic Contrast : MediumShadow Detail : 0Gamma : 0RGB Only Mode : OffColour Space : NativeWhite Balance▼U Move E Enter R ReturnBlack Tone (Off / Dark / Darker / Darkest)■ : Select theblack level to adjust the screen depth.Dynamic Contrast (Off / Low / Medium / High)■ : Adjustthe screen contrast.Shadow Detail (-2~+2)■ : Increase the brightness of darkimages.Disabled under PC mode.✎Gamma■ : Adjust the primary colour intensity.■ RGB Only Mode (Off / Red / Green / Blue): You canadjust Colour or Tint of Red, Green or Blue for thepicture from an external device (DVD player, hometheatre, etc.).Colour Space (Auto / Native)■ : Adjust the range ofcolors available to create the image.White Balance■ : Adjust the colour temperature for amore natural picture.R-Offset / G-Offset / B-Offset: Adjust each colour’s(red, green, blue) darkness.R-Gain/G-Gain/B-Gain: Adjust each colour’s(red, green, blue) brightness.Reset: Resets the White Balance to it’s default settings.Flesh Tone■ : Emphasize pink “Flesh Tone.”Edge Enhancement (Off / On)■ : Emphasize objectboundaries.xvYCC (Off / On)■ : Setting the xvYCC mode onincreases detail and colour space when watching moviesfrom an external device (e.g. DVD player) connected tothe HDMI or Component IN jacks.Available when the picture mode is set to✎ Movieand when the external input is set to HDMI orComponent.Some external devices may not support this✎ function.Picture OptionsIn PC mode, you can only make changes to the✎ ColourTone, Size and Auto Protection Time.Picture OptionsColour Tone : Normal ►Size : 16:9Screen Mode : 16:9Digital Noise Filter : AutoMPEG Nosie Filter : AutoHDMI Black Level : NormalFilm Mode : Off▼U Move E Enter R ReturnColour Tone (Cool / Normal / Warm1 / Warm2)■Warm1✎ or Warm2 will be deactivated when thepicture mode is Dynamic.Settings can be adjusted and stored for each✎ external device connected to an input on the TV.