Samsung LE32C570 User Manual

Also see for LE32C570: User manual

Contents

13English03 Basic FeaturesSatellite System SetupThe PIN input screen appears. Enter your 4 digit PIN number.Satellite System Setup is available when Antenna is set toSatellite. Before running Auto Store, set Satellite SystemSetup. Then channel scan is run normally.Satellite Selection■ : You can choose the satellites forthis TV.LNB Power (Off / On)■ : Enables or disables the powersupply for the LNB.LNB Settings■ : Configures the outdoor equipment.Satellite: Selects the satellite for receiving digitalbroadcasts.Transponder: Selects a transponder from the list oradds a new transponder.DiSEqC Mode: Selects DiSEqC mode for the selectedLNB.Lower LNB Oscillators: Sets the LNB oscillators to alower frequency.Upper LNB Oscillators: Sets the LNB oscillators to ahigher frequency.Tone 22 khz (Off / On / Auto): Selects the Tone 22kHz depending on the LNB type. For a universal LNB itshould be Auto.Signal Quality: Display the current status ofbroadcasting signal.Positioner Settings■ : Configures the antenna positioner.Positioner (Off / On): Enables or disables the positionedcontrol.Positioner Type (USALS / DiSEqC 1.2): Setsthe positioned type between DiSEqC 1.2 andUSALS(Universal Satellite Automatic Location System).My Longitude– : Sets the longitude for my location.My Latitude– : Sets the latitude for my location.Satellite Longitude Settings– : Sets the longitude ofuser defined satellites.User Mode: Sets the position of satellite antennaaccording to each satellite. If you store the currentposition of satellite antenna according to a certainsatellite, when the signal of that satellite is needed,the satellite antenna can be moved to pre-populatedposition.Satellite– : Selects the satellite to set the position for.Transponder:– Selects a transponder from the list forsignal reception.Moving Mode:– Selects the movement mode betweendiscrete and continuous movement.Step Size:– Adjusts the step size degrees for theantenna rotation. Step Size is available when MovingMode is set to Step.Go to Stored Position– : Rotates the antenna to thestored satellite position.Antenna Position– : Adjusts and stores the antennaposition for the selected satellite.Store Current Position– : Stores current position asthe selected positioner limit.Signal Quality– : Display the current status ofbroadcasting signal.Installer Mode: Sets limits to the scope of movementof satellite antenna or reset the position. Generally,installation guide uses this function.Limit Position (East / West)– : Selects the direction ofthe positioner Limit.Antenna Position:– Adjusts and stores the antennaposition for the selected satellite.Store Current Position:– Stores the current positionas the selected positioner Limit.Go to Zero– : Moves the antenna to the referenceposition.Reset Positioner Limit– : Allows the antenna to rotateover the full arc.Reset All Setting (OK / Cancel)■ : All satellite settings willbe reset to the initial values.¦ Editing channelsChannel Manager Option Menu(in Channel Manager)1. Select a channel and press the TOOLS button.2. Edit the channel name or number using the EditChannel Name or Edit Channel Number menu.Edit Channel Name■ (analogue channels only): Assignyour own channel name.Edit Channel Number■ (digital channels only): Edit thenumber by pressing the number buttons desired.Other Features¦Cable Search Option(depending on the country)Sets additional search options such as the frequency andsymbol rate for a cable network search.Freq.Start / Freq.Stop■ : Set the start or stop frequency(differs in each country)Modulation■ : Displays available modulation values.Symbol Rate■ : Displays available symbol rates.