WPS ButtonIf the router has a WPS push button, you can use it to connect the TV to the router automatically. WPSautomatically configures the SSID and WPA key settings.11 Setting Network Type to Wireless automatically displays a list of available wireless networks.21 Select WPS(PBC) and then press the router's WPS button within two minutes.31 The TV automatically acquires the SSID and security key settings and connects to the network. Aconfirmation message is then shown once a connection is established. Select OK to proceed.Failed Wireless ConnectionWireless network connection failed, or no wireless router selected. Try Now Try NowGo to Network Settings and select the correct router.Unable to connect to a wireless router Try Now Try NowCheck the following:11 Check that the router is turned on, and if it is, turn it off and on again.21 Enter the correct security key if required.IP auto setting failed Try NowPerform the following or set the IP address manually from IP Settings.11 Make sure that the DHCP server is enabled on the router and unplug and plug the router back in.21 Enter the correct security key if required.31 If this does not work, contact your Internet Service Provider for more information.
