English-Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box)via Component cablesTV Rear Panel Component Cable (Not supplied)DVD Player or Cable Box /Satellite receiver (Set-Top Box)2 Audio Cable (Not supplied) Connect a Component Cable betweenthe COMPONENT IN [Y, PB, PR] jackson the TV and the COMPONENT [Y,PB, PR] jacks on the DVD Player orCable Box/Satellite receiver (Set-TopBox).2 Connect Audio Cables between theCOMPONENT IN [R-AUDIO-L] jackson the TV and the AUDIO OUT jackson the DVD Player or Cable Box/Satellite receiver (Set-Top Box).Component video separates the videointo Y (Luminance (brightness)), Pb(Blue) and Pr (Red) for enhanced videoquality.Be sure to match the component videoand audio connections.For example, if connectinga Component video cable toCOMPONENT IN, connect the audiocable to COMPONENT IN also.Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has adifferent back panel configuration.When connecting a DVD Player orCable Box/Satellite receiver (Set-TopBox), match the color of the connectionterminal to the cable.➣➣➣Connecting a Camcorder Connect a Video Cable (or S-VideoCable) between the AV IN [VIDEO](or S-VIDEO) jack on the TV and theVIDEO OUT jack on the camcorder.2 Connect Audio Cables between theAV IN [R-AUDIO-L] jacks on the TVand the AUDIO OUT jacks on thecamcorder.Each Camcorder has a different backpanel configuration.When connecting a Camcorder, matchthe color of the connection terminal tothe cable.➣➣orTV Side Panel2 Audio cable (Not supplied)Camcoder Video Cable (Not supplied) S-Video Cable (Not supplied)