Basic FeaturesPicture Options[_ MENU rITI_ Picture _ Picture OptionsENTERIn PC mode, you can only make changes to the ColorTone and Size.Ill Color Tone (Cool / Normal / Warm1 / Warm2)Warm1 or Warm2 will be deactivated when thepicture mode is Dynamic.Settings can be adjusted and stored for eachexternal device connected to an input on the TMIll Size: Your cable box/satellite receivermay have its own set of screen sizes aswell. However, we highly recommendyou use 16:9 mode most of the time.16:9: Sets the picture to 16:9 widemode.Zoom1: Use for moderate magnification.Zoom2: Use for a stronger magnification.Wide Fit: Enlarges the aspect ratio of the picture to fitthe entire screen.4:3: Sets the picture to basic (4:3) mode.Do not watch in 4:3 format for a long time. Tracesof borders displayed on the left, right and centerof the screen may cause image retention (screenburn) which are not covered by the warranty.Screen Fit: Displays the full image without any cut-offwhen HDMI (720p / 1080i/1080p) or Component(1080i / 1080p) signals are input.NOTE" After selecting Zoom1, Zoom2 or Wide Fit:1. Press the I_ button to select Position.2. Press the ENTERIZ_ button.3. Press the A or • button to move the picture upor down.4. Press the ENTERIZ_ button.5. Press the _ button to select Reset.6. Press the ENTERE_ button to reset the pictureto its default position.After selecting Screen Fit in HDMI (1080i/1080p) orComponent (1080i/1080p) mode, you may need tocenter the picture:1. Press the _ or _- button to select Position.2. Press the ENTERI_ button.3. Press the A, _', _ or _, button to move thepicture.4. Press the ENTERC_ button.5. Press the _ or _ button to select Reset.6. Press the ENTERI_ button.* HD (High Definition): 16:9 - 1080i/1080p (1920x1080),720p (1280x720)* Settings can be adjusted and stored for eachexternal device you have connected to an input onthe TV.ATe, AV,Component (480i, 480p)DTV(1080i),Component (1080i, 1080p),HDMI (720p, 1080i, 1080p)PC16:9, Zoom1,Zoom2, 4:316:9, 4:3, Wide Fit,Screen Fit16:9, 4:3Ill Digital Noise Filter (Off / Low / Medium / High /Auto): If the broadcast signal received by your TV isweak, you can activate the Digital Noise Filter featureto reduce any static and ghosting that may appear onthe screen.When the signal is weak, try other options until thebest picture is displayed.Ill HDMI Black Level (Normal / Low): Selects the blacklevel on the screen to adjust the screen depth.Available only in HDMI mode (RGB signals).Ill Film Mode (Off / Auto): Sets the TV to automaticallysense and process film signals from all sources andadjusts the picture for optimum quality.Available in ATV, DTV(interlace), AV, COMPONENT(480i/1080i) and HDMI (480i/1080i).Picture Reset(Reset Picture Mode / Cancel)Resets your current picture mode to it's default settings.Ill Reset Picture Mode: Returns all picture values in thecurrently selected mode to the default settings.6 English