English - Storing Channels AutomaticallySelecting the Video Signal-sourceBefore your television can begin memorizing the available channels, you mustspecify the type of signal source that is connected to the TV (i.e. an Air or aCable system).1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select Channel, then press the ENTEREbutton.2. Press the ENTERE button to select Antenna.Press the ▲ or ▼ button to select Air, STD, HRC, IRC or Cable,then press the ENTERE button.Press the EXIT button to exit.Storing Channels in Memory (Automatic Method)First, select the correct signal source (Air, STD, HRC or IRC).1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select Channel, then press the ENTEREbutton.2. Press the ▲ or ▼ button to select Auto Program, then press theENTERE button.If a channel is locked using the Child Lock function, the PIN input windowappears.3. Press the ▲ or ▼ button to select the antenna connection, then pressthe ENTERE button.STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type ofcable system that exists in your particular area. At this point, the signal source has been selected.The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to twominutes.Press the ENTERE button at any time to interrupt the memorization process and return to the Channel menu.4. The TV begins memorizing all available stations.To stop the search before it has finished, press the ENTERE button with Stop selected.5. After all the available channels are stored, the Auto Program menu reappears.Press the EXIT button to exit.NNNNNPictureSoundChannelSetupInputAntenna : Air �Auto Program �Channel List �Fine Tune �Color System : Auto �UMove EEnter RReturnTV ChannelPictureSoundChannelSetupInputAntenna : Air �Auto Program �Channel List �Fine Tune �Color System : Auto �UMove EEnter RReturnTV Channel