English - Ad-hoc: You can connect to a mobile device without an access point through the ‘Samsung Wireless LAN Adapter’ byusing a peer to peer network.How to connect to new Ad-hoc1. Choose Select a network, then a device list is displayed.2. While in the device list, press the Blue button on the remote or select Ad-hoc.The message The existing network system may have limitedfunctionality. Do you want to change the network connection? isdisplayed.. Input the generated Network Name(SSID) and Security Key into thedevice you want to connect.NHow to connect an existing Ad-hoc device1. Choose Select a network, the device list is displayed.2. Select the device you want in the Device list.. If security key was applied, input the security key again.If network doesn’t operate normally, please check the NetworkName(SSID) and Security Key again. If the Security Key is incorrect,it may be the reason for the malfunction.NWireless Network Setup-Auto SetupIf you want to connect AP, AP should support DHCP. Only devices which support Ad-hoc modecan be connected without DHCP.1. Set Network Type to Wireless.2. Select Wireless Network Setup.. Set Internet Protocol Setup to Auto Setup.The Internet Protocol is set automatically.4. Select a network through Select a network.. Select Network Test to check the network connectivity.Wireless Network Setup-Manual Setup1. Set Network Type to Wireless.2. Select Wireless Network Setup.. Set Internet Protocol Setup to Manual Setup.4. Set up IP Address, Subnet Mask, Gateway and DNS Server.Press the number buttons on the remote control when you set the Network manually.. Select a network through Select a network.6. Select Network Test to check the network connectivity.NNInternet Protocol Setup : Auto Setup ▶Network TestSelect a network : AP1U Move E Enter R ReturnWireless Network SetupIP Address :Subnet Mask :Gateway :DNS Server :Internet Protocol Setup : Manual Setup ▶Network TestSelect a network : AP1U Move E Enter R ReturnWireless Network SetupIP Address : 0 0 0 0Subnet Mask : 0 0 0 0Gateway : 0 0 0 0DNS Server : 0 0 0 0The existing network system may have limitedfunctionality. Do you want to change the networkconnection?Yes No
