26 EnglishOther InformationSecuring the TV to the Wall (depending on the model)Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your childrendo not hang over or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries ordeath. Follow all safety precautions provided in the included Safety Flyer with your TV. For added stabilityand safety, you can purchase and install the anti fall device as described below.Parts included in the Kit:TV-Holder Screw 1 (M8 X L28) Screw 2 (M6 X L16) Screw 3 (M4 X L12) Screw 4 (M4 X L16)PDP / LED / LCD (46inches or larger)LCD (32 – 40 inchesmodels only)UN**C9000model onlyLED / LCDPlastic Cover onlyInstalling the TV-holder1. Read these instructions through once before you start.2. Remove the screw attached to the back of your TV, and then connect the TV-Holder to the TV with the screw included inthe TV-Holder Kit (1, 2, 3 or 4) that is designated for your TV.✎ Make sure to use only the appropriate supplied screw. If you use a different screw, you can damage your TV.PDP / LED /LCD (46 inches or larger)LCD(32 – 40 inches models only)UN**C9000model onlyLED / LCDPlastic Cover only13211413211413211413211413211413211413214