English - 44Setting up the TV with your PCHow to Auto AdjustUse the Auto “Adjust function” to have the TV set automatically adjust the videosignals it receives. The function also automatically fine-tunes the settings andadjusts the frequency values and positions.This function does not work in DVI-Digital mode.Preset: Press the SOURCE button to select PC mode.1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Picture”, then press the ENTERbutton.2. Press the ▲ or ▼ button to select “Auto Adjustment”, then press theENTER button.Press the EXIT button to exit.Easy Setting1. Press the TOOLS button on the remote control.2. Press the ▲ or ▼ button to select “Auto Adjustment”, then press theENTER button.Adjusting the Screen QualityThe purpose of the picture quality adjustment is to remove or reduce picture noise.If the noise is not removed by fine tuning alone, then make the vertical frequencyadjustments on your PC and fine tune again. After the noise has been reduced,re-adjust the picture so that it is aligned on the center of the screen.Preset: Press the SOURCE button to select PC mode.1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Picture”, then press the ENTERbutton.2. Press the ▲ or ▼ button to select “Screen”, then press the ENTERbutton.3. Press the ▲ or ▼ button to select “Coarse” or “Fine”, then press theENTER button. Press the ◄ or ► button to adjust the screen quality.Vertical stripes may appear or the picture may be blurry.Press the ENTER button.Press the EXIT button to exit.➣➣➣➣Brightness : 45Sharpness : 50Auto Adjustment ►ScreenDetailed SettingsPicture OptionsPicture ResetPictureAuto Adjustment in progress. Please Wait.Sharpness : 50Auto AdjustmentScreen ►Detailed SettingsPicture OptionsPicture ResetPictureScreenCoarse 50Fine 0PC PositionImage ResetEnterMove Return50CoarseEnter ReturnAdjustMoveToolsDevice ListPicture Mode : StandardSound Mode : CustomSleep Timer : OffPIPAuto Adjustmente ExitEnterMoveTVPC ----AV1 ----AV2 ----S-Video ----Component1 ----Component2 ----Refresh OptionSource List
