Samsung LN40A630M1F User Manual

Also see for LN40A630M1F: Manual Quick setup guide User manual User manual

Contents

English - 12Turning the TV On and OffPress the POWER button on the remote control.You can also use the POWER button on the TV.OperationPlug & Play FeatureWhen the TV is initially powered on, basic settings proceed automatically andsubsequently.1. Press the POWER button on the remote control.The message “Menu Language, Store Demo, Channels, and Time will beset.” is displayed.Press the ENTER button, then “Select Language of the OSD.” menuis automatically displayed. Press the ENTER button.2. Press the ▲ or ▼ button to select language, then press the ENTERbutton. The message “Select ‘Home Use’ when installing this TV in yourhome.” is displayed.3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, thenpress the ENTER button. The message “Select the Antenna source tomemorize.” is displayed.We recommend setting the TV to “Home Use” mode for the best picture inyour home environment.“Store Demo” mode is only intended for use in retail environments.If the unit is accidentally set to “Store Demo” mode and you want to returnto “Home Use” (Standard): Press the Volume button on the TV. When thevolume OSD is displayed, press and hold the MENU button on the TV for5 seconds.4. Press the ▲ or ▼ button to memorize the channels of the selectedconnection. Press the ENTER button to select “Start”.Air: “Air” antenna signal.Cable: “Cable” antenna signal.Auto: “Air” and “Cable” antenna signals.In Cable mode, you can select the correct signal source among STD,HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press theENTER button. If you have Digital cable, select the cable systemsignal source for both Analog and Digital. Contact your local cablecompany to identify the type of cable system that exists in your particulararea.5. The TV will begin memorizing all of the available channels.To stop the search before it has finished, press the ENTER button with“Stop” selected.After all the available channels are stored, it starts to remove scrambledchannels (see page 41). And then, the Auto program menu reappears.Press the ENTER button when channel memorization is complete.The message “Set the Clock Mode.” is displayed.➣➣➣➣➣➣Plug & PlaySelect ‘Home Use’ when installing this TV in yourhome.Home UseStore DemoEnterMovePlug & PlaySelect Language of the OSD.Menu Language : EnglishEnterMoveEnglishEspañolFrançaisPlug & PlayMenu Language, Store Demo, Channels, and Time willbe set.OKEnterPlug & PlaySelect the Antenna source to memorize.AirCableAutoStartSkipEnterMoveStartStartPlug & PlayAuto Program in Progress.StopCable 3850%DTV Air : 02 Air : 11DTV Cable : 23 Cable : 21SkipEnterStartPlug & PlaySelects the cable system.AnalogDigitalHRC IRCHRC IRCSTDSTDSkipEnterMovePlug & PlayRemoving scrambled channel.StopDTV Cable 4177%DTV Air : 05 Air : 12DTV Cable : 25 Cable : 32SkipEnterPlug & PlayAuto Program is completed.119 channels are memorized.DTV Air : 05 Air : 24DTV Cable : 10 Cable : 80OKSkipEnter