Samsung LN40A650A1FXZA Quick Setup Manual

Also see for LN32A650A1F: Manual User manual User guide User manual Quick setup guide

English-5Connecting a VCR234If you have a “mono” (non-stereo)VCR, use a Y-connector (notsupplied) to hook up to the rightand left audio input jacks of theTV. If your VCR is stereo, youmust connect two cables.➣Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.Each VCR has a different back panel configuration.When connecting a VCR, match the color of the connection terminal to the cable.When connecting to AV NI 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable(Yellow).➣➣➣TV Rear Panel3 RF Cable(Not supplied)5 Audio Cable(Not supplied)VCR Rear Panel4 Video Cable(Not supplied)5Connect the cable or antennato the ANT IN terminal on theback of the VCR.Connect an RF Cable betweenthe ANT OUT terminal on theVCR and the ANT IN terminalon the TV.Connect a Video Cablebetween the VIDEO OUT jackon the VCR and the AV IN 1[Y/VIDEO] or AV IN 2 [VIDEO]jack on the TV.Unplug the cable or antennafrom the back of the TV.Connect Audio Cables betweenthe AUDIO OUT jacks on theVCR and the AV IN 1 (or AV IN 2)[R-AUDIO-L] jacks on the TV.Video ConnectionS-Video ConnectionTV Rear Panel RF Cable(Not supplied)3 Audio Cable(Not supplied)VCR Rear Panel2 Connect an S-Video Cablebetween the S-VIDEO OUT jackon the VCR and the AV IN 2[S-VIDEO] jack on the TV.3 Connect Audio Cables betweenthe AUDIO OUT jacks on the VCRand the AV IN 2 [R-AUDIO-L]jacks on the TV.To begin, follow steps 1–3 inthe previous section to connectthe antenna or cable to yourVCR and your TV.An S-Video cable may be includedwith a VCR. (If not, check your localelectronics store.)Each VCR has a different backpanel configuration.When connecting a VCR, matchthe color of the connectionterminal to the cable.➣➣2 S-Video Cable(Not supplied)TV Side PanelTV Side Panel