English - 108Cable Network SetupFirst, the “Network selection” must be set to “Cable”. (See page 107)Auto SetupIf you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.Please check if the LAN cable is connected. (See page 105)1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.2. Press the ▲ or ▼ button to select “Cable Network Setup”, then press theENTER button.3. Press the ENTER button to select “Internet Protocol Setup”.4. Press the ▲ or ▼ button to select “Auto Setup”, then press the ENTERbutton.The Internet Protocol is set automatically.Select “Network Test” to check the network connectivity.(Refer to page 109)Press the EXIT button to exit.Manual SetupTo connect the TV to the LAN using a static IP address, you must set up theInternet Protocol (IP).Please check if the LAN cable is connected. (See page 106)1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.2. Press the ▲ or ▼ button to select “Cable Network Setup”, then press theENTER button.3. Press the ENTER button to select “Internet Protocol Setup”.4. Press the ▲ or ▼ button to select “Manual Setup”, then press the ENTERbutton.5. Press the ▲, ▼, ◄ or ► button to move to an item, and press the numericbutton to configure the selected item. Press the ENTER button.Select “Network Test” to check the network connectivity.(Refer to page 109)Press the EXIT button to exit.➣➣➣➣➣➣SetupTimeNetwork selection : CableCable Network Setup ►Wireless Network SetupV-ChipCaptionExternal SettingsEntertainment : OffEnergy Saving : OffPIPSetupTimeNetwork selection : CableCable Network Setup ►Wireless Network SetupV-ChipCaptionExternal SettingsEntertainment : OffEnergy Saving : OffPIPCable Network SetupInternet Protocol Setup : Auto SetupNetwork TestIP Address : 0 0 0 0Subnet Mask : 0 0 0 0Gateway : 0 0 0 0DNS Server : 0 0 0 0EnterMove ReturnAuto SetupManual SetupCable Network SetupInternet Protocol Setup : Auto SetupNetwork TestIP Address : 0 0 0 0Subnet Mask : 0 0 0 0Gateway : 0 0 0 0DNS Server : 0 0 0 0EnterMove ReturnAuto SetupManual SetupCable Network SetupInternet Protocol Setup : Manual SetupNetwork TestIP Address : 0 0 0 0Subnet Mask : 0 0 0 0Gateway : 0 0 0 0DNS Server : 0 0 0 0Enter ReturnMove Number0 ~
