Samsung LN40C560J2F Quick Setup Manual

Also see for 560: User manual Installation manual

Contents

quick setup guide

English - 2Changing Channels and Adjusting the VolumeYou can change the channel andadjust the volume by usingthe CH and VoL buttons on theremote. You can also changethe channels by pressing thez buttons on the frontpanel of your TV and adjust thevolume by pressing the ybuttons.Setting the ClockBefore you can use your tV’s on/off timer, you must set the clock. to setthe clock, follow these steps:1. Turn on your TV.2. Using your remote, press theMEnu button on your remote.Then, select Setup → time.3. Select Clock Mode, and thenpress the EntErE button.Set Clock Mode to Manual.Select Auto if you have a digital✎ channel in your area and arenot using a cable/sat box.4. Select Clock Set, and then press the EntErE button.The Clock Set screen appears.5. Using the number buttons on your remote, enter the Month, Day, year,Hour, and Minute. Use the ◄ or ► button to move between entry fields.6. Press the rEturn button on your remote when done.Connecting a USB Device for Media Playyou can enjoy photo, music, and movie filesstored on a uSB device by connecting it tothe tV and using the Media Play feature. toconnect a uSB device for Media Play, followthese steps:1. Turn on your TV.2. Connect a USB devicecontaining photo, music and/or movie files to the uSB1(HDD) or uSB2 jack on theside of the TV.3. When the Applicationselection screen appears,press the EntErE buttonon your remote to selectMedia Play (uSB).Selecting a SourceTo watch a movie on your Blu-ray player or watchyour favorite TV show, you must select the correctsource. A source is a device, such as a Blu-ray/DVD player, a cable/satellite box, antenna or acable TV input. Sources can be connected toyour TV through the HDMI, DVI, Component,Composite, or D-sub connections, or through theAntenna or Cable In connections.To view the signal from a source connected to the HDMI, DVI, Component,Composite, or D-sub jack, press the SourCE button on your remote. Each timeyou press the SourCE button, you change to a different source.Viewing the On Screen Menusto view the on Screen Menus, follow these steps:1. With the power on, press the MEnu buttonon your remote. The main menu appears.The menu’s left side has the following menuoptions: Picture, Sound, Channel,Setup, input, Application, and Support.2. Press the ▲ or ▼ button on your remote toselect a menu option, and then press theEntErE button.3. When done using the menu, press the Exit button on your remote to exit.Network Connection - WirelessYou can connect your TV to your LAN through a standard wireless router or modem.To connect wirelessly, you must first attach a Samsung Wireless LAN Adapter(WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the uSB1(HDD) or uSB2 port on the back of your TV. See the illustration below.The LAN Port onthe WallLAN CableWireless IP sharer(AP having DHCP Server)Samsung WirelessLAN AdapterSamsung WirelessLAN AdapterTV Side Panel TV Rear PanelSamsung’s Wireless LAN adapter supports the IEEE 802.11A, IEEE 802.11B, IEEE802.11G, and IEEE 802.11N wireless communication protocols. For your TV toconnect to your network, the wireless router or modem you use must also supportone of these protocols. The fastest of these protocols is IEEE 802.11N.Most wireless network systems incorporate a security system that requires devicesthat access the network through an access point or AP (typically a wireless modemor router) to transmit an encrypted security code called an access key.For regular connections, your TV is compatible with the following security protocols:• Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK• Encryption Type: WEP, TKIP, AESConfiguring the Network Connection - WirelessThe instructions below are for networks that use the Dynamic Host ConfigurationProtocol (DHCP) to configure network connections automatically. If your have aStatic IP network, see your user’s manual for configuration instructions.to configure your network connection for a network that uses DHCP, followthese steps:1. Connect your TV to your network asshown in the illustrations above.2. Turn on your TV, press theMEnu button on your remote, andthe select Setup → network.3. Set the network type to wireless ifit is not already set to wireless.4. Select network Setup. Thenetwork Setup screen appears.5. On the network Setup menu, select an AP(Access Point) and ad hoc network.if you have selected network with a security key, the Security Key screenappears.6. Enter the s using the numbers on the remote, and then press the Blue buttonon your remote.If your network uses WEP security encryption, 0~9 and A~F will be✎ available on the Security Key screen. Use the Direction button on yourremote to move to the characters and the enter key to select them.7. On the network Setup menu, set internet Protocol Setup andDnS to Auto. The Auto acquires and enters the necessary internet valuesautomatically.8. Select network test to check internet connectivity.For more information, see your user’s manual.✎Connecting to a Local Area NetworkTo enjoy watching streaming content from online providers such as You Tube andBlockbuster, you must follow the steps below to connect the TV to your network.Network Connection - WiredThere are two main ways to connect your TV to your network using cable,depending on your network setup. They are illustrated below:The LAN Port on the Wall TV Rear PanelLAN CableThe Modem Port on the Wall External Modem(ADSL / VDSL / Cable TV)TV Rear PanelLAN CableModem CableMenuReturn to the previous channel.Cut off the sound temporarily.Link to various internet services.Press to display information on the TV screen.Exit the menu.Change channels.Displays the main on-screen menu.Displays the Content View, which includes ChannelList, Internet@TV, Media Play, and AllShare.Adjusts the volume.MEDiA.P: Displays Media Play.yAHoo!: Runs Yahoo widget.MtS: Press to choose stereo, mono or Separate AudioProgram (SAP broadcast).FAV.CH: Displays Favorite Channel Lists on the screen.P.SizE: Choose the picture size.CC: Controls the caption decoder.Power IndicatorRemote control sensorTurns the remote control light on and off. When on, thebuttons become illuminated for a moment when pressed.(Using the remote control with this button set to off willreduce the battery usage time.)Bn68-03018A-01If your TV is attached to a cable or satellite box, you change✎ the channel using the box’s remote.L Move U Adjust E Enter R ReturnClock SetMonth Day yearHour Minute am/pm-- -- ------ -- --Press to switch between the sources (Blu-ray player,cable box, DVD player, etc.) connected to your TV.Press to select additional digital channels broadcastby the same station. For example, to select channel54-3, press 54, press -, and then press 3.Press number buttons for direct access to channels.Turns the TV on and off.Displays the channel list on the screen.Quickly selects frequently used functions.Return to the previous menu.Colored buttons for use in the Channel List, Media Playmenu, etc.Use these buttons in the Media Play and Anynet+ modes.( : Controls recording on Samsung recorders with theAnynet+ feature)Selects the on-screen menu items and changes thevalues seen on the menu.TV Side PaneluSB DriveMediaPlayVideosSuM A Change Device D View Devices E Enter R returnRemote Control Buttons and Functions:This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume buttons.✎Configuring the Network Connection - WiredMost home networks use the Dynamic Host Configuration Protocol (DHCP) toconfigure network connections. Home networks that support DHCP automaticallyprovide the IP address, subnet mask, gateway, and DNS values your TV needs toaccess the Internet so you don’t have to enter them manually.to configure your network connection for a network that uses DHCP, followthese steps:1. Connect your TV to your networkas shown in one of the illustrationsabove.2. Turn on your TV, press the MEnubutton on your remote,and then select Setup → network.3. Set the network type to wired if itis not already set to wired.4. Select network Setup. Thenetwork Setup screen appears.5. On the network Setup menu, set internet Protocol Setup and DnS to Auto.Auto acquires and enters the necessary internet values automatically.6. Select network test to check Internet connectivity.Some networks are Static IP networks. If your network is a Static IP✎ network, you can not use DHCP to configure the network connection.Instead, you must enter the iP Address, Subnet Mask, Gateway, andDnS Server manually. For instructions explaining how to configure aStatic IP network, see your user’s manual.internet Protocol Setup : Auto ►U Move E Enter R Returnnetwork SetupDnS : AutoDnS Server :iP Address :Subnet Mask :Gateway :Select a network : not Selected ►internet Protocol Setup : AutoU Move E Enter R Returnnetwork SetupDnS : AutoDnS Server :iP Address :Subnet Mask :Gateway :or

/ 2

Related manuals for Samsung 560