Samsung LN46A630 User Manual

Also see for LN40A630 - 40" LCD TV: Manual Quick setup guide User manual

Contents

Scanning and Switching between Anynet+ Devicest, Press the TOOLS button.Press the ENTER _ button to select "Anynet+ (HDMI-CEC)".2, Press the A or • button to select "Device List", then press the ENTERbutton.3=>- Anynet+ devices connected to the TV are listed.If you cannot find a device you want, press the red button to scan fordevices.>- Only when you set "Anynet+ (HDMI-CEC)" to On in the "Setup" menu, the"Device List" menu appears.Press the A or T button to select to a particular device and press theENTER _ button. It is switched to the selected device.>- Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switchingoperation.>- The time required to scan for devices is determined by the number of connected devices.>- When the device scan is complete, the number of devices found are not displayed.>- Although the TV automatically searches the device list when the TV is turned on via the power button, devicesconnected to the TV when the TV is on or under some conditions are not automatically displayed in the device list.Press the red button to search for the connected device.If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet + function. Makesure to switch to an Anynet + device by using the "Device List"Anynet + MenuThe Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV.Anynet + Menu DescriptionView TV Anynet+ mode changes to TV broadcast mode.Device List Shows the Anynet+ device list.Shows the connected device menus.(device_name) Menu E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear.(device_name) Operation Shows the play menu of the connected device.E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear.Starts recording immediately using the recorder. (This is only available for devices thatRecord: (*recorder) support the recording function.)Enables reserving a recording for the recorder. (This is only available for devices that(*recorder) Reserve Recording support the recording reservation function.)Stop Recording: (*recorder) Stops recording.Receiver Sound is played through the receiver.>- If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device isconnected, it will be represented as (*device_name).TV Remote Control Buttons Available in Anynet + ModeDeviceType Operat!ngStat,s ...........After switching to the device, when the Numeric buttonsmenu of the corresponding device is A./T/_I/I_/ENTER _ buttonsAnynet + Device displayed on the screen. Color buttons / EXIT buttonAfter switching to the device, while _ (Backward search) / _ (Forward search)playing a fileAfter switching to the device, when youDevice with built-in Tuner are watching a TV OH v / OH ^ buttonprogram>- The Anynet + function only works when the active source on the TV remote control is set to TV.>- The _ button works only while in the recordable state.>- You cannot control Anynet + devices using the buttons on the TV. You can control Anynet + devices only using the TVremote control.>- The TV remote control may not work under certain conditions. In this case, reselect the Anynet + device.>- The Anynet + functions do not operate with other manufacturers' products.>- The [_, _ operations may differ depending on the device.