Samsung LN46A850S1F Quick Setup Manual

Also see for LN46A580P6F: User manual User manual

Contents

English-8SET RESETReturnEnterAuto ProgramSelect the Antenna source to memorize.AirCableAutoMoveStartStartStartTVSET RESETVCR DVD STBTurning the TV On and OffPress the POWER button on the remote control.You can also use the POWER button on the TV.2With the power on, press the MENU button.The main menu appears on the screen.The menu’s left side has icons: Picture, Sound,Channel, Setup, Input, Application.Press the ▲ or ▼ button to select one of the icons.Then press the ENTER button to access theicon’s sub-menu. Press the EXIT button to exit.To move to a lower menu, turn the wheelclockwise when the menu Display is displayed.To move to a higher menu, turn the wheelcounterclockwise.The on-screen menus disappear from thescreen after about one minute.➣➣Storing Channels in Memory(Automatic Method) Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Channel”, thenpress the ENTER button.2 Press the ▲ or ▼ button to select “Auto Program”,then press the ENTER button.3 Press the ▲ or ▼ button to select the antennaconnection, then press the ENTER button.4 When selecting the Cable TV system: Press theENTER button to start the auto program.Press the ▲,▼, ◄ or ► to select the correct analogsignal cable system source among “STD”, “HRC”,and “IRC”. Press the ▲ or ▼ button to select “Start”,then press the ENTER button. If you have Digitalcable TV, select the cable system signal source forboth Analog and Digital.Viewing the Menus5 The TV begins memorizing all available stations.Press the EXIT button to exit.To Stop the Auto Program FunctionPress the MENU button while the Auto Program function isbeing executed. You can also press the ENTER buttonto stop the setup.Checking to see if Channels were Stored in MemoryPress the CH button. Only the channels stored in memorywill be selected (in order).Selecting the antennas• Air: “Air” antenna signal.• Cable: “Cable” antenna signal.• Auto: “Air” and “Cable” antenna signals.Auto ProgramAuto Program in Progress.StopEnterCable 3850%ReturnDTV Cable : 12 Cable : 32Auto ProgramRemoving scrambled channel.StopEnterDTV Cable 4177%ReturnDTV Cable : 16 Cable : 45After all the available channels are stored, itstarts to remove scrambled channels. The Autoprogram menu then reappears.➣Auto ProgramSelects the cable system.AnalogDigitalHRC IRCHRC IRCReturnEnterMoveSTDStartSTD