Samsung LN52B750 User Manual

Also see for LN40B750: User manual User manual Quick setup guide User manual User manual

Contents

LAN Connection for Static IP EnvironmentThe procedures to set up the network using a static IP address are described below. You have to manually enter the IP address,subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP).1. Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable.The LAN Port on theWall TV Rear PanelO LAN CableYou can connect the LAN via a Sharer (Router).The LAN Porton the Wall TV Rear PanelIPSharerThe terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. You mustenter these values to complete the network settings. If you do not know the values, ask your network administrator.For the information on how to configure and connect a Sharer (Router), refer to the owner's manual for the correspondingproduct.You can connect the TV to the LAN directly without connecting it through a Sharer (Router).If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IRFor the procedures to use a static IP address, ask your Internet Service Provider.