APPENDIX A.2Installing VESA compliant mountingdevicesRefer to page A.3 to remove the base.Rear cover Mounting padA P P E N D I XAlign the mounting interface pad with the holes in the rear cover mounting pad and secure it with the fourscrews that come with the arm-type base, wall mount hanger or other bases.Wall Mount InstructionsThe following instructions apply to a hollow sheet-rock wall only. Tools/Hardware needed - Philipsscrewdriver, four toggle bolts, 5/8in dia. Drill bit and drill. Contact Ergotron at (800) 888-8458 to purchase thetriple pivot direct mount adapter and wall mount bracket kit.• LTM1575 (15") : No. 47 - 007 - 099 (Pivot direct mount adapter)No. 97 - 101 - 003 (Wall mount bracket kit)• LTM1775 (17") : No. 47 - 007 - 099 - 02 (Pivot direct mount adapter)No. 97 - 101 - 003 - 00 (Wall mount bracket kit)Align the wall mount bracket on the wall at the desired height, making sure that the bracket will be mountedbetween the wall studs. Mark the four corner openings and drill four 5/8-dia.holes.Assemble the wall mount kit according to the instructions provided with it. Securely attach Ergotron’s flatpanel, triple pivot direct mount adapter to the back of the TV using the four 4mm, .7 pitch x 10mm screwsprovided with the arm. Secure the assembly to the wall using four 3/16 by 3-inch long toggle bolts.
