3029To select the desired radio stationAutomatic TuningPress and hold the FM button.• The frequency of the receivedstation appears on the display ofthe remote control.• Press the button to select eitherMono or Stereo.1To turn off the radio, pressand hold the Stop (n) button.3Press and hold the Iî or ïI .• Automatically scans and tunes to the nextavaiable station.Press the Iî or ïI.• Press the button repeatedly to tune in thedesired station manually.2• The reception may not be clear in a weak signal area.• If the reception of an FM station transmitting in stereo is weak, press theST/MO button to switch to the mono mode for improved sound quality.NoteManual TuningListening to FM RadioST91.9 MHZSTEREOST87.9 MHZSTEREOST89.9 MHZSTEREO• Press the Play/Pause (√»)button to switch to CD mode.Use the Iî , ïI buttons to tune in to a desired radio station.Press Iî or ïI to select the preset“MEMORY 2”.• Each time the button is pressed a higher orlower preset number is selected.• Start with the preset station number 1 if youare presetting stations for the first time sincethe purchase of the product.2* You can either manuallyor automatically presetand store FM stations.Presetting Stations in Memory(Memory function)EXAMPLE: Storing an FM station at 89.1 MHz into preset number 2Tune to a station of 89.1 MHz andthen press the PROG./NAVI. button.1Press the PROG./NAVI. button again tostore the selected station.• The preset number disappears, indicatingthat the station has been stored.• Repeat steps 1 to 3 to change the station orstore other stations. You can preset up to 15stations.3Tuning in to a Preset Station89.1 MHZSTEREO89.1 MHZ2STEREOMemory89.1 MHZSTEREOPress Iî or ïI to select thedesired preset number.• "Preset" remains, and the frequenciesof the preset stations are displayed in turn.2 93.5 MHZ3STEREOPresetIf you have already storedstations into memory,press the Preset button.1 91.9 MHZ1STEREOPreset• "Preset" and the station frequency storedunder that preset number appear on the display.MCD-HF200(GB) 3/5/03 3:15 PM Page 29