Setting the On Timer If you press the button when the Off Timer is set,the Off Timer is also cancelled.NNNN oooo tttt eeeeThe On Timer enables you to switch on the air conditioner automaticallyafter a given period of time. You can set the period of time from30 minutes to 24 hours.To set the operating time, press the button one or more times untilthe required time is displayed. Possible time is between 0.5 hour and 24hours inclusive.1Press the (Set/Cancel) button to complete the setting.Result: The remaining time is displayed. Blinking of the timer indicator stops. The selected mode and the temperature on the displaydisappear after 10 seconds. The air conditioner will switch on automatically when thecounter displayed on the remote control reaches the set timeand disappears the On timer setting.2Press the (Set/Cancel) button.To Cancel the On TimerE-20To select an operating mode in advance, press the button until thedesired mode is displayed at the top of the remote control.Result: The air conditioner will run in the selected mode when it isturned on.3