Samsung MH14VA2 Owner's Instructions Manual

E-23ENGLISHSolving Common ProblemsExplanation/Solution Check that the breaker used for the air conditioner is switched on. Check that the 5 Way indicator on the indoor unit is on;if necessary press the (On/Off) button on the remote control. Check whether the TIMER indicator on the indoor unit is switched on.If so:- Wait until the switch-on time is reached and the air conditioner startsup automatically- Cancel the timer (see pages 18 and 19 for further details) Check that there are no obstacles between you and the indoor unit. Check the remote control batteries. Check that you are close enough to the indoor unit (seven metres/yards or less). Check that you are pointing the remote control at the remote controlsensor in the right of the indoor unit. Replace the remote control batteries if necessary. Check that the correct operating mode has been selected (AUTO,COOL, HEAT). The room temperature may be too low or too high. Dust may be blocking the air filter guard; refer to page 22 for cleaninginstructions. Check that there is no obstacle in front of the outdoor unit. Check that you have selected an appropriate mode. If you selectCOOL or DRY [HEAT] mode from an indoor unit, the other indoor unitcannot be operated in HEAT [COOL or DRY] mode. Check that the required temperature has been set correctly. Increase the fan speed. If the air flow is directed downwards, use the remote control to direct itupwards. Check that the operating mode is set to COOL, HEAT or FAN ; in theAUTO mode, the fan speed changes automatically and in theDRY mode, it is set to AUTO. Check that the air conditioner has been switched on; if necessary,press the (On/Off) button on the remote control. Check that the timer has been programmed correctly; see pages 18and 19. Air the room.ProblemThe air conditioner does notoperate at allThe air conditioner does notoperate with the remote controlNo beep is heard when you pressthe (On/Off) on the remotecontrolThe air conditioner does not coolor heatAn operating mode is not selectedfrom the remote controlWhen heating, the required roomtemperature is never reached andthe air conditioner frequently stopsThe fan speed does not changewhen you press the FAN buttonThe air flow direction does notchange when you press theSWING buttonThe timer is not correctly triggeredOdours are permeated in the roomduring air conditioningBefore contacting the after-sales service, perform the following simple checks.They may save you the time and expense of an unnecessary call.

/ 26

Related manuals for Samsung MH14VA1(A2)(C1)(C2)-07