Samsung MIM-B18 User Manual

Also see for MIM-B17: User manual User manual Installation manual Service manual

E-14Set the current time of DMS2 system. “2009/01/01 01:01:01” is factory setting. Set the current time as DMS2 system time.You can set DMS2 time in [System Settings] [System environment setting](Refer to page 104~105)Starting DMS2Current time setting(1) Make sure that centralized controller communication cables(C1, C2) or interface modulecommunication cables(R1, R2) are connected. For communication between DMS2 and centralized controller/interface module,centralized controller communication cable(C1, C2) or interface modulecommunication cable(R1, R2) should be connected.(2) Execute tracking. DMS2 communicates with centralized controller and interface module and bringsinformation about installed indoor unit and outdoor unit. After tracking, you can use indoor unit control and other menu. For tracking, refer to [System Settings]  [Tracking] (Refer to page 120~130)Connecting centralized controller & interface moduleStarting DMS2If DMS2 time does not set as the current time, DMS2 may cause malfunction whenusing Schedule or control logic management.