Samsung MIM-H03UN User & Installation Manual

Also see for MIM-H03UN: User & installation manual

Contents

7ENGLISH3 Use two or more screws to fix the rear cover of the Wi-Fi kit to a wall Then, connect the power cable (V1, V2) and thecommunication cable (F1, F2) to the terminals on the back of the front cover in appropriate length4 When connecting the V1 and V2, tighten the screws for the terminal block (CN5) with a tightening torque of 5 ±2 N·cmSize of the screw is M3 x 6• Maximum number of indoor unit installation that can be connected to Wi-Fi kit is 16• One Wi-Fi kit can be registered with maximum 5 users- If you register more than 5 users to single Wi-Fi kit, its operation may become slower• Each account (one mobile phone) can be registered with maximum 4 Wi-Fi kitsⒷⒺ ⒻⒶⒹⒸ10 mm(9/16 inch) ormore10 mm(9/16 inch) or more50 mm (2 inches)or more10 mm(9/16 inch) or moreScrewfixingholeRear cover❋❋ Before fixing the rear cover, allow10mm or more space for upper,left, and right sides and 50mmspace for bottom side❋❋ Fix the screws in theprovided screw holes❋❋ Do not tighten the PCB terminal withtoo much forceV1 V2 F1 F2Wi-Fi kitPCBterminalIndoor unitItem ContentsⒶ Power/communication connection terminalⒷ Tracknig/Initializing buttonⒸ SD Card SlotⒹ LEDⒺ Network PBAⒻ Interface module PBANOTEMULTI WIFI APP-NA_05417A-05_EN.indd 7 2018-02-28 오전 11:08:32