Service ManualProduct spec and feature2-22 Samsung ElectronicsSupply- Output Voltage : -400 V ~ -800V DC 50 V(ZENER using, DEV )- Input contrast of the output stability degree : under 5 %Loading contrast : 5 % or less- Output Voltage Rising Time : 50 ms Max- Output Voltage Falling Time : 50 ms Max- Output Loading range : 10 M ~ 1000 M- Output Control Signal (BIAS-PWM) : the CPU is HV output when PWM is low.2.2.3.2(b) SMPS (Switching Mode Power Supply)It is the power source of entire system. It is assembled by an independent module, so it is possible to use for commonuse. It is mounted at the side of the set.It is consisted of the SMPS part, which supplies the DC power for driving the system, and the AC heater control part,which supplies the power to fuser. SMPS has two output channels. Which are +5V and +24V.AC Input- Input Rated Voltage : AC 220V ~ 240V AC 110V ~ 127V- Input Voltage fluctuating range : AC 198V ~ 264V AC 99V ~ 135V- Rated Frequency : 50/60 Hz- Frequency Fluctuating range : 47 ~ 63 Hz- Input Current : Under 4.0Arms / 2.0Arms (But, the status when e-coil is off or rated voltage is inputted/outputted )THVTHVSUPPLYSUPPLYOPCOPCVARISTORVARISTORSW1( Front -CoverOpen Switch )SW1( Front -CoverOpen Switch )CN1(Main PBA CON.)CN1(Main PBA CON.)SW2( Rear-CoverOpen Switch )SW2( Rear-CoverOpen Switch )DEVDEVMHVMHV
