Service ManualAlignment & Adjustments4-6 Samsung Electronics* The procedure and content above can be changed according to the situation.• FunctionFunction Name Description Display(LCD)Fuser Fan The fan will run or stop. Fuser Fan [ON] / [OFF]Fuser Fan Rdy Check whether the fan is in locked state. Fuser Fan Rdy.[Ready] / [Not Ready]SMPS Fan The fan will run or stop. SMPS Fan [ON] / [OFF]SMPS Fan Rdy Check whether the fan is in locked state. SMPS Fan Rdy.[Ready] / [Not Ready]Duplex Fan The fan will run or stop. Duplex Fan [ON] / [OFF]* The procedure and content above can be changed according to the situation.4.1.7 Clutch / SolThese functions are to check a current state (normal or not) of the solenoids and clutches.• Usage1. Press the Arrow Keys ( ) until finding Component Test / 5.Clutch/Sol Test message on the panel.2. Press the OK Key , when it is found.3. Press the Arrow keys until finding a suitable function. (Refer to the table below)4. Press the OK Key , when it is found.5. Press the OK Key for execution or the Back key for retun.• FunctionFunction Name Description Display(LCD)T1 P-up Clutch The clutch will run or stop. T1 P-up Clutch [ON] / [OFF]T2 P-up Clutch The clutch will run or stop. T2 P-up Clutch [ON] / [OFF]T3 P-up Clutch The clutch will run or stop. T3 P-up Clutch [ON] / [OFF]T4 P-up Clutch The clutch will run or stop. T4 P-up Clutch [ON] / [OFF]Bypass Clutch The clutch will run or stop. Bypass Clutch [ON] / [OFF]Duplex Sol. The solenoid will run or stop. Duplex Sol. [ON] / [OFF]
