Network setup_ 363.network setupThis chapter gives you step-by-step instructions for setting up the network connected machine and software.This chapter includes:• Network environment• Introducing useful network programs• Using a wired network• Installing network connected machine’s driver• IPv6 ConfigurationSupported optional devices and features may differ according to yourmodel. Please check your model name (See "Features by Models" onpage 25).NETWORK ENVIRONMENTYou need to set up the network protocols on the machine to use it as yournetwork machine. You can set up the basic network settings through themachine's control panel.The following table shows the network environments supported by themachine:ITEM SPECIFICATIONSNetwork interface • Ethernet 10/100/1000 Base-TX• 802.11 b/g/n Wireless LAN (Optional)Network operating system • Windows2000/XP/2003/2008/Vista/7/2008Server R2• Various Linux OS• Mac OS X 10.3 ~ 10.8• UNIX• Novell NetWare 5.x, 6.x (TCP/IP Only)Network protocols • TCP/IPv4• 802.1x• DHCP, BOOTP, AutoIP• DNS, WINS, Bonjour, SLP, UPnP• Standard TCP/IP Printing (RAW), LPR,IPP, WSD• SNMPv 1/2/3, HTTP (S), Telnet, SMTP(S), LDAP (S), IPSec• SMB, FTP, Kerberos• TCP/IPv6 (DHCP, DNS, RAW, LPR,SNMPv 1/2/3, HTTP (S), IPSec)(See "IPv6 Configuration" on page 40.)Wireless security(Optional)• Authentication: Open System, SharedKey, WPA Personal, WPA2 Personal(PSK)• Encryption: WEP64, WEP128, TKIP,AESINTRODUCING USEFUL NETWORK PROGRAMSThere are several programs available to setup the network settings easily innetwork environment. For the network administrator especially, managingseveral machines on the network is possible.Before using the programs below, set the IP address first.SyncThru™ Web ServiceWeb server embedded on your network machine, which allows you to:• Configure the network parameters necessary for the machine to connectto various network environments.• Customize machine settings.(See "Using SyncThru™ Web Service" on page 68.)SyncThru™ Web Admin ServiceA web-based machine management solution for network administrators.SyncThru™ Web Admin Service provides you with an efficient way of man-aging network devices and lets you remotely monitor and troubleshoot net-work machines from any site with corporate internet access. Download thisprogram from http://solution.samsungprinter.com.SetIPThis utility program allows you to select a network interface and manuallyconfigure the IP addresses for use with the TCP/IP protocol (See "IPv4 set-ting using SetIP Program (Windows)" on page 37, "IPv4 setting using SetIPProgram (Mac)" on page 37 or "IPv4 setting using SetIP Program (Linux)"on page 38).TCP/IPv6 is not supported by this program.USING A WIRED NETWORKYou must set up the network protocols on your machine to use it on yournetwork. This chapter will show you how this is easily accomplished.You can use network after connecting network cable to a correspondingport on your machine.Printing configuration reportYou can print a Configuration Report from the machine’s control panel thatwill show the current machine’s network settings. This will help you to set upa network and troubleshoot problems.