176 Section 2J: Using the Built-in Camera and Camcorder On This Shot to activate the flash for one shot. Always to activate the flash for all pictures.Setting the Self-TimerTo activate the Self-Timer:1. From camera mode, press Options ( ).2. Highlight Self-Timer and press the navigation key upor down to select the desired length of delay(Off, 10 seconds, 5 seconds) and press .3. Press to focus the image. (If the focus issuccessful, the view finder focus points willturn green. If unsuccessful, they will turn red.4. Select Capture ( ) when you are ready to start thetimer.5. Get ready for the picture. (The phone will begin tobeep when the timer is started.)To cancel the Self-Timer after it has started: Press .Note: Auto-Focus must be turned on to press OK before takingthe picture. If Auto-Focus is turned off, pressing OK willtake the picture. To turn Auto-Focus on, see “SelectingCamera Settings” on page 180.Note: While the Self-Timer is active, all keys are disabled exceptBack (stops the timer and returns to the camera mode), End(cancels the timer and returns to standby mode), and theright softkey button (Cancel).
