GBConnecting HeadphonesYou can connect a set of headphones to your microcomponent system so that you can listen to music or radioprograms without disturbing other people in the room.The headphones must have a 3.5 mm connector orappropriate adaptor.Connect the headphones to the Phones connector on the rear panel(or top right corner).Result: The loudspeakers are no longer used for sound output.Prolonged use of headphones at a high volume may damage yourhearing.You can set the system to switch off automatically.Example: You wish to fall a sleep to music.Press SLEEP on the remote control.Result: The following indications are displayed:Press SLEEP one or more times to indicate how long the system shouldcontinue playing before it switches off:At any time, you can:Check the remaining time by pressing SLEEPChange the remaining time by repeating Steps 1 and 2To cancel the sleep timer function, press SLEEP one or more times untilOFF is displayed and the word SLEEP disappears.Sleep TimerCD/MP3-CDTUNERBANDMO/STTIMER/CLOCK TIMER ON/OFFAUX PROGRAM/SET REP. A BSLEEP EQ/S.BASS TAPE SPEEDREV.MODE SHUFFLE COUNTER RESET90 MIN 60 MIN 45 MINOFF 15 MIN 30 MIN1231,2,3MUTE FunctionYou can turn the sound off temporarily.Example: You wish to answer a telephone call.Press MUTE button.To switch the sound back on (at the same volume as before), pressMUTE again, or press the VOLUME +, - button.12TUNERBANDMO/STTIMER/CLOCK TIMER ON/OFFAUX PROGRAM/SET REP. A BSLEEP EQ/S.BASS TAPE SPEEDMUTEREV.MODE SHUFFLE COUNTER RESETMicrophone Function (option)The microphone enables the user to mix in his or her vocals tosing -along with the music.PreparationPlug the microphone with a 3.5mm jack into microphone terminal.MIC20